power supplies, scientific instruments scientific instruments
Manufacturer of high voltage power supplies
power supplies, photomultiplier tubes
PRODUCTS | COMPANY PROFILE | FAQ's | CAREERS | NEWS & EVENTS | SUPPORT | CONTACT US | HOME

 

MS0.2MZZ065

PRECISION HIGH VOLTAGE MODULE

Application: Beam steering, Focus and bias supplies, Deflector Plates, Electron guns & Ion beams

  • High Stability, Low Ripple
  • Externally programmable - through zero control
  • Short circuit and flashover proof
  • 24 hour burn in

This power supply provides six outputs each separately programmable from -200V to +200V with respect to Gnd. It is intended for steering, focusing & biasing of electron & ion beam applications. Biasing steering plates in pairs, this can control X, Y & Z directions. Each output is controllable cleanly through zero.

Please consult the factory for special variants of this supply including high speed versions.

Electrical Specification

Input +24V dc ±0.5V <0.5A. 0V input common to HV return and chassis.
+15V dc ±0.05V <0.5A , & -15Vdc ±0.5V <0.05A.
Control of output -10V to +10V for –100% to 100% ±2%, (Zin = 200Kohm)
Output Current 100μA per channel
Voltage monitor -8V to +8V ±2% for –100% to 100%. (Zout= 10k)
Current Monitor Not available
Ripple <25mV pk to pk
Line regulation <100ppm for 1V change in input voltage
Load regulation <100ppm for 10uA to maximum load
Temperature co-efficient <25ppm/ºC
Drift (after 1 hour warm up) <0.01% per hour, <0.05 over an 8 hour period
Protection (all outputs) Protected against intermittent arcing and continued short circuit to ground. While able to source or sink 100uA, the unit will be damaged by sustained sinking of a beam current in excess of 200uA.

Environmental Specification

Temperature, storage

+10°C to +50°C. Humidity (RH) <31°C 80% maximum
Temperature, operating -35°C to +85°C. Humidity (RH) >30°C Decrease linearly to 50°C
Altitude, operating Up to 2,000m. Altitude, storage Up to 18,000m
 

Mechanical Specification

Dimensions 210 x 114 x 47 mm
Mounting centres 4 off M4 studs
Input / control 40 Way IDC header, 0.05” pitch, straight latching, bump/clip polarised
(Thomas & Betts 635-4034ES) Mating connector supplied.
Mating Output Socket QM 12 way plug, Souriau SMS 12 P1, plus SMS12H1 (Hood)
plus 12 off T2P20FC1LT Trident 20AWG socket contacts

Download PDF

Download PDF:

Data Sheet


power supplies
power supply manufacturer
Power Supplies | Units by o/p Voltage | Company Profile | FAQ's | Contact | Careers | Site Map | Home