| |
| SIX INDEPENDENT -200V TO +200V OUTPUTS
MS0.2MZZ065 MODULE
Applications
- Beam steering
- Focus & bias supplies
- Deflector plates
- Electron guns & ion beams
|
[Click image to enlarge] |
|
This power supply provides six outputs each separately programmable
from -200V to +200V. It is intended for steering, focusing &
biasing of electron & ion beam applications. Please consult
the factory for special variants of this supply including high speed
versions.
Pin Connection & Safety Instructions |
ELECTRICAL
SPECIFICATION |
| Input voltage: |
+24V d.c. ±0.5V at
0.5A
+15V d.c. ±0.5V at 0.05A. & -15V d.c ±0.5V
at 0.05A |
| Output Voltage: |
-200V to +200V controlled
by -10V to +10V analogue signal (each channel). |
| Output current: |
100uA per channel. |
| Control: |
-10V gives -200V ±2%,
+10V gives +200V ±2% |
| Speed: |
To be defined. |
| Ripple: |
Less than 25mV peak to peak,
ripple frequency 50 kHz. |
| Load regulation: |
Less than 100ppm. |
| Line regulation: |
Less than 100ppm. |
| Temperature co-efficient: |
25ppm per °C. |
| Output monitor: |
-8V to +8V represents -200V
to +200V ±5% on the corresponding output. |
| Operating temperature: |
0 °C to +45 °C |
Storage Temperature: |
-35°C to +85°C |
|
Mechanical
Specification |
| Size: |
210 x 114 x 47mm, 4 stud
fixing. |
| Input connector: |
40 way IDC header, 0.05"
pitch, straight latching, bump/clip polarised (Thomas &
Betts 636-4034ES). Mating connector supplied. |
| Output connector: |
QM 12 way socket, right
angle pcb mounting (Burndy SMS12GE5). |
|
Environmental Conditions : |
Indoor use only, Altitude up to 2000m. |
|
| Order Code:
There are no variants of this unit, so the order code is MS0.2MZZ065
Please note this corresponds to the unit formerly called K1/65.
Only the part number and the case colour have changed, the electrical
characteristics remain the same.
|
Top | Detailed Photo | Pin Connection & Safety Instructions
|
