ELECTRICAL SPECIFICATION
|
|
Input voltages:
|
24 volt d.c. ±5%
at 2A. Negative input terminal common to HV earth return.
|
|
Output Voltage 1:
|
20V to 5kV at 300uA.
|
|
Output Voltage 2 to 5:
|
As output 1. All outputs are individually controlled.
|
|
Polarity:
|
Each channnel can be factory set either positive or negative
(combinations such as 3 positive & 2 negative are possible).
|
|
Please note the following applies to each of the 5 outputs:
|
|
Controls (5 separate):
|
0 to +10V gives 0 to 5kV.
|
|
Voltage monitors:
|
0 to +10V represents 0 to 5 kV (all 5 outputs).
Source resistance 10 kohm.
|
|
Ripple:
|
Less than 150mV peak to peak on each output.
|
|
Line regulation:
|
Less than 50ppm for 1V change in input.
|
|
Load regulation:
|
Less than 50ppm.
|
|
Output Tolerance:
|
Better than 2% of control voltage.
|
|
Temperature coefficient:
|
Better than 200ppm per °C.
|
|
Operating temperature:
|
0 °C to +45 °C.
|
