• 1kV, 2.5kV, 5kV, 10kV, 15kV, 20kV, 30kV, 50kV
• Highest Stability, Lowest Ripple, Lowest Drift
• Externally programmable or Internal control (option)

• Short circuit and flashover proof
• 24 hour burn in
• Low radiated magnetic field
• Positive, negative & remote reversible versions

Electrical Specification
Positive & Negative Polarity Units

UNIPOLAR UNIT TYPE

OUTPUT VOLTAGE

OUTPUT CURRENT

TEMP-CO (/ ºC)

&SIZE (mm);

WIEIGHT

LS001xIP010

10V to 1kV

1mA

<2mV (pk-pk)

<10ppm

152 x 124 x 63

1.2

LS2.5xIP010

10V to 2.5kV

400uA

<3mV (pk-pk)

<10ppm

152 x 124 x 63

1.2

LS005xIP010

10V to 5kV

200uA

<5mV (pk-pk)

<10ppm

152 x 124 x 63

1.2

LS010xIP010

20V to 10kV

100uA

<10mV (pk-pk)

<10ppm

152 x 124 x 63

3

LS015xIP010

30V to 15kV

66.7uA

<15mV (pk-pk)

<10ppm

207 x 148 x

74 4

LS020xIP010

50V to 20kV

50uA

<20mV (pk-pk)

<10ppm

207 x 148 x 74

4

LS030xIP010

100V to 30kV

33.3uA

<30mV (pk-pk)

<10ppm

207 x 148 x 74

4

LS050xIP010

200V to 50kV

20uA

<50mV (pk-pk)

<10ppm

333 x 204 x 119

12.5

Electrical Specification
REVERSIBLE POLARITY UNITS

LS001RIP010

±10V to ±1kV

1mA

<2mV (pk-pk)

<10ppm

162 x 152 x 71.5

1.7

LS2.5RIP010

±10V to ±2.5kV

400uA

<3mV (pk-pk)

<10ppm

162 x 152 x 71.5

1.7

LS005RIP010

±10V to ±5kV

200uA

<5mV (pk-pk)

<10ppm

162 x 152 x 71.5

1.7

LS010RIP010

±20V to ±10kV

100uA

<10mV (pk-pk)

<10ppm

162 x 152 x 71.5

1.7

LS015RIP010

±30V to ±15kV

66.7uA

<15mV (pk-pk)

<10ppm

233 x 204 x 114

10

LS020RIP010

±50V to ±20kV

50uA

<20mV (pk-pk)

<10ppm

233 x 204 x 114

10

LS030RIP010

±100V to ±30kV

33.3uA

<30mV (pk-pk)

<10ppm

333 x 204 x 119

12.5

INPUT VOLTAGE:

+24 volt d.c. ±10% at <150mA, for Unipolar, and at <200mA for Reversibles. Negative input terminal common to HV earth return.

OUTPUT VOLTAGE:

See tables above.

LINE REGULATION:

Less than 2ppm of maximum voltage for input changes of 1 volt.

LOAD REGULATION:

Less than 2ppm for load changes from (Measured at maximum voltage).

OVERLOAD PROTECTION:

Flashover and short circuit proof. Re-entrant current limit.

TEMPERATURE CO-EFFICIENT:

<10ppm/°C from 20°C to 50°C

DRIFT:

<50ppm per hour (<0.005%)
<100ppm per 8 hours (<0.01%)
Measured at constant input voltage, load current & ambient temperature after 0.5 hour warm up.

CONTROL:

10V analogue signal. (0 to Input impedance > 100Kohm.
EXTERNAL potentiometer = Option Code PP
INTERNAL potentiometer = Option Code FP

READOUT:

Voltage monitor : 0 to +10V represents zero to maximum output, tolerance ±2% (Source resistance 10k).
Precision Current Monitor : 0 to 10V represents zero to of FS.

OPERATING TEMPERATURE:

0°C to +50°C

STORAGE TEMPERATURE:

-35°C to +85°C

R.F.I.:

Steel case for low radiated magnetic field.

Mechanical Specification

FIXINGS:

Blind Fasteners front and rear.

OUTPUT:

By 1 metre screened cable, or optional integrated high voltage connector
N.B. Reducing the cable length may increase the ripple voltage.

INPUT CONNECTOR:

15 way D-type