|
Input voltages: |
+24 V ±10% at 1A. |
|
Bias Output voltage: |
See table above. Joined within the unit to Detector -ve |
|
Bias Control voltage: |
0V to +10 V gives 0V to max. kV ±2%.
nb: Internal manual potentiometer control not fitted. |
|
Load regulation: |
Less than 100 ppm for zero to max. load. |
|
Line regulation: |
Less than 100 ppm for 1V change in I/P volts. |
|
V monitor: |
0 to ±10V represents 0 to ±max o/p voltage, ±2% output impedance 10 kohm. |
|
I monitor: |
0 to ±10V represents 0 to ±max o/p current, ±5% output impedance 10 kohm. |
|
Speed of reversing: |
< 500 mS. |
|
Temperature Co-efficient: |
<25 ppm per °C. (<10ppm per °C available shortly) |
|
Detector Control Voltage: |
0V to +10 V gives 0V to 3 kV ±5%. |
|
Minimum Detector O/P V: |
500V |
|
Detector Vmon: |
0 to 10 V represents 0 to 3kV o/p voltage, output impedance 10 kohm. |
|
Detector Load regulation: |
< 0.1% for zero to max. load. |
|
Detector Line regulation: |
< 0.1% for 1V change in I/P volts. |
Detector Temp-co: |
<300 ppm per °C. |
Operating temperature: |
0 °C to +45 °C. |
